Upgrade Connectware from 1.x to 1.5 (Docker Guide)

This Cybus Docker guide provides a detailed procedure to help admins adjust the persistent volume content permissions to ensure a smooth upgrade to Connectware 1.5.0 in Docker Compose environments.

Important: Connectware 1.5.0 introduces a significant change regarding container privileges. Now, containers are started without root privileges. This change causes an issue where files that persisted on volumes that were created by a user other than the one accessing them, cannot easily have their permissions changed. As a result, this upgrade requires the admin to manually update the permissions.

Attention: The following protocols may not operate as expected in some constellations:
  • Profinet
  • Hottinger Baldwin Messtechnik (HBM)
  • OPC DA

If you experience problems with these protocols after upgrading to Connectware 1.5.0 (or higher), these affected services may require root permissions and are no longer supported by the internal protocol-mapper or agents without root permissions.

In this case, you should transfer the service that uses these protocols to a separate agent. This agent can have higher permissions but in a controlled manner.

To learn how to configure an agent to run with root permissions, see the section on agent orchestration.

Upgrading Procedure

As an additional step to this upgrade, we provide a docker-compose.override.yml file to help you configure volume permissions.

The upgrade procedure consists of the following steps:

  1. Shut down Connectware.
  2. Save the provided file as docker-compose.override.yml in the same folder as your Connectware docker-compose.yml.
  3. Start the the Docker composition to adjust the volume permissions.
  4. Remove the docker-compose.override.yml file.
  5. Upgrade Connectware using the connectware-online-installer.sh script.

1. Shutting Down Connectware

  • In your installation folder (by default /opt/connectware), run docker compose down.
  • Run the command as you normally would. Either as a regular user using sudo or directly as the user root.

All containers should be stopped and removed:

Containers stopped and removed

2. Downloading and Saving the Override File

  • Create a new YAML file in the Connectware installation folder and name it docker-compose.override.yml with the following content:
version: "2.0"
services:
  connectware-fix-permissions:
    user: root
    image: registry.cybus.io/cybus/connectware-fix-permissions:1.5.0
    volumes:
      - certs:/mnt/connectware_certs
      - brokerLog:/mnt/connectware_brokerLog
      - brokerData:/mnt/connectware_brokerData
      - postgresql:/mnt/connectware_postgresql
      - service-manager:/mnt/connectware_service-manager
      - systemControlServerData:/mnt/connectware_systemControlServerData
      - workbench:/mnt/connectware_workbench
  admin-web-app:
    profiles:
    - do-not-start
  auth-server:
    profiles:
    - do-not-start
  broker:
    profiles:
    - do-not-start
  connectware:
    profiles:
    - do-not-start
  container-manager:
    profiles:
    - do-not-start
  doc-server:
    profiles:
    - do-not-start
  ingress-controller:
    profiles:
    - do-not-start
  postgresql:
    profiles:
    - do-not-start
  protocol-mapper:
    profiles:
    - do-not-start
  service-manager:
    profiles:
    - do-not-start
  system-control-server:
    profiles:
    - do-not-start
  workbench:
    profiles:
    - do-not-start
Code language: YAML (yaml)

Download: upgrade-1-5-docker-compose.override.yml

If you already have a docker-compose.override.yml file for your Connectware installation, make sure to rename it before saving it as docker-compose.override.yml.

3. Adjusting Volume Permissions

  • To adjust the volume permissions, run docker compose up.
    • Run the command as you normally would. Either as a regular user using sudo or directly as the user root.

Example output:

[+] Building 0.0s (0/0)
[+] Running 1/0
✔ Container connectware-connectware-fix-permissions-1  Created                              0.0s
Attaching to connectware-connectware-fix-permissions-1
connectware-connectware-fix-permissions-1  | Found directory: connectware_brokerData. Going to change permissions
connectware-connectware-fix-permissions-1  | Found directory: connectware_brokerLog. Going to change permissions
connectware-connectware-fix-permissions-1  | Found directory: connectware_certs. Going to change permissions
connectware-connectware-fix-permissions-1  | Found directory: connectware_postgresql. Going to change permissions
connectware-connectware-fix-permissions-1  | Postgresql volume identified, using postgresql specific permissions
connectware-connectware-fix-permissions-1  | Found directory: connectware_service-manager. Going to change permissions
connectware-connectware-fix-permissions-1  | Found directory: connectware_systemControlServerData. Going to change permissions
connectware-connectware-fix-permissions-1  | Found directory: connectware_workbench. Going to change permissions
connectware-connectware-fix-permissions-1  | All done. Found 7 volumes.
connectware-connectware-fix-permissions-1 exited with code 0
Code language: YAML (yaml)

4. Removing Override File

  • Run docker compose down to remove the temporary permissions fix container.
    • Run the command as you normally would. Either as a regular user using sudo or directly as the user root.
  • Next, delete the docker-compose.override.yml file.
    • If you used a docker-compose.override.yml for your Connectware before this update, restore your original file.

5. Upgrading Connectware

  • As of usual for other updates, download and run the Connectware online installer (make sure to change the version to 1.5.0 or higher), allow executable permissions and run the online installer:
wget https://download.cybus.io/1.5.0/connectware-online-installer.sh
chmod +x connectware-online-installer.sh
./connectware-online-installer.sh
Code language: YAML (yaml)
  • Run the command as you normally would. Either as a regular user using sudo or directly as the user root.

Note: You may need sudo access to install/update Connectware, this is normal, however the new Connectware containers will not have root access once they are running.

After upgrading, you can start Connectware as usual.

Optional: To verify that Connectware services are running with an unprivileged user, you can run this command:

docker ps -qf="label=io.cybus.connectware=core" | xargs -I % docker exec % sh -c 'echo "$(hostname) runs with user ID $(id -u)"'
Code language: YAML (yaml)

Only the service container-manager should use the user ID 0.

Upgrading Connectware Agents

Connectware agents are ideally orchestrated using docker-compose as described in agent orchestration.

To upgrade your agents, do one of the following:

  • Adjust volume permissions to allow unprivileged users to write data (recommended).
  • Adjust your Docker composition to continue running with higher privileges.

To benefit from the security improvements, we recommend that you adjust volume permissions rather than continuing to run with elevated privileges.

Important: If you are experiencing problems after upgrading to Connectware 1.5.0 (or higher), the affected services may require root permissions. In such cases, it is advisable to choose to run your agents with elevated privileges (see below).

Similar to adjusting permissions for the Connectware instance, we provide a docker-compose.override.yml to help you adjust volume permissions.

The upgrade consists of the following steps:

  1. Shut down the agent.
  2. Save the provided file as docker-compose.override.yml in the same folder as your agent’s docker-compose.yml.
  3. Start the the Docker composition to adjust volume permissions.
  4. Remove the docker-compose.override.yml file.
  5. Upgrade the agent by adjusting the image tag in your docker-compose.yml file.

1. Shutting Down the Agent

  • Within your agent’s installation folder (NOT the Connectware installation folder), run docker compose down.
    • Run the command as you normally would. Either as a regular user using sudo or directly as the user root.

2. Downloading and Saving the Override File

  • In your agent’s installation folder, create a docker-compose.override.yml with the following content:
version: '2.0'
services:
  connectware-fix-permissions:
    user: root
    image: registry.cybus.io/cybus/connectware-fix-permissions:1.5.0
    volumes:
    - protocol-mapper-agent:/mnt/connectware_agent_data
  protocol-mapper-agent:
    profiles:
    - do-not-start
Code language: YAML (yaml)

Download: upgrade-1-5-agent-docker-compose.override.yml

If you use a different name for your agent Docker service and volume than our example, you need to adjust the name of the agent to your actual agent’s name (lines 7 and 8 of the example above) and its volume in your docker-compose.yml file.

3. Adjusting Volume Permissions

  • Run docker compose up.

Example output:

[+] Building 0.0s (0/0)
[+] Running 2/2
✔ Network agent_default                          Created                                                                                                0.1s
✔ Container agent-connectware-fix-permissions-1  Created                                                                                                0.1s
Attaching to agent-connectware-fix-permissions-1
agent-connectware-fix-permissions-1  | Found directory: connectware_agent_data. Going to change permissions.
agent-connectware-fix-permissions-1  | All done. Found 1 volumes.
agent-connectware-fix-permissions-1 exited with code 0
Code language: YAML (yaml)

4. Removing the Override File

  • Run docker compose down to remove the temporary permissions fix container.
    • Run the command as you normally would. Either as a regular user using sudo or directly as the user root.
  • Delete the file docker-compose.override.yml.
    • If you used a docker-compose.override.yml for your agent before this update, restore your original file.

5. Upgrading the Agent

  • As before, set the image tag used for the agent to the same tag as your current Connectware installation, but at least 1.5.0. If you have not yet upgraded Connectware to at least version 1.5.0, do so now.

Example of an agent YAML file for agent running 1.5.0:

version: '2.0'
services:
  protocol-mapper-agent:
    image: registry.cybus.io/cybus/protocol-mapper:1.5.0
    environment:
      CYBUS_AGENT_MODE: distributed
      CYBUS_AGENT_NAME: myAgent
      CYBUS_MQTT_HOST: 172.17.0.1
    volumes:
      - protocol-mapper-agent:/data
    restart: unless-stopped
    network_mode: host
    hostname: myAgent
volumes:
  protocol-mapper-agent:
Code language: YAML (yaml)

You can now start your agent as usual, for example by running docker compose up -d.

Upgrading by Using Root Privileges

As an alternative to modifying volume permissions, or if you are using a protocol that requires elevated permissions, you can modify your agent’s docker-compose.yml file to specify the user which is used for the container.

  • To do so, add user: root to the docker compose service of your agent and set the image tag to the same tag that your current Connectware installation uses.

For example (see line 4):

version: '2.0'
services:
  protocol-mapper-agent:
    user: root
    image: registry.cybus.io/cybus/protocol-mapper:1.5.0
    environment:
      CYBUS_AGENT_MODE: distributed
      CYBUS_AGENT_NAME: myAgent
      CYBUS_MQTT_HOST: 172.17.0.1
    volumes:
      - protocol-mapper-agent:/data
    restart: unless-stopped
    network_mode: host
    hostname: myAgent
volumes:
  protocol-mapper-agent:
Code language: YAML (yaml)
  • You can now start your agent as usual, for example by running docker compose up -d.
  • If you use a docker run command, you can add --user=root to the command.

Related Articles

Was this article helpful?
YesNo
Need more help?

Can’t find the answer you’re looking for?
Don’t worry, we’re here to help.

Contact support
Share this article
Content

  • Previous

    Upgrade Connectware from 1.x to 1.5 (Kubernetes Guide)

Oops, your browser does not support this website.

Dear visitor, you are trying to visit our website using Internet Explorer. The support for this browser has been discontinued by the manufacturer, which is why it can no longer display modern web pages correctly.
To view the content of this website correctly, you need a more modern browser.

Under the following links you will find browsers for which our website has been optimized:

Download Google Chrome Browser Download Mozilla Firefox Browser

You can still view this website, but you will have to face significant restrictions.

Show this website anyway.